IT tugi ja kaugabi ✶ IT helpdesk & remote assistance

ID kaardi koopia (esi- ja tagaküljest) tegemise juhend

ID kaardi mõlemast küljest koopia tegemiseks tõsta üles dokumendisöötja ja aseta ID kaart klaasi peale vasakusse nurka (esimene külg vastu klaasi)
Klaas võib jääda avatuks. Dokumendisöötjat alla lasta ei ole vaja.
ID Card Front
Seejärel puuduta printeri puute-ekraanilt “Easy Copy” valikut mis on tähistatud number ühega kõrval oleval ekraanitõmmisel. Home Screen
Puuduta valikut “Detail” mis on tähistatud number kahega kõrval oleval ekraanitõmmisel. Easy Copy Details
Puuduta valikut “Others” mis on tähistatud number kolmega kõrval oleval ekraanitõmmisel. Easy Copy Others
Puuduta valikut “Card Shot” mis on tähistatud number neljaga kõrval oleval ekraanitõmmisel. Card Shot
Puuduta valikut “On” mis on tähistatud number viiega kõrval oleval ekraanitõmmisel.

…ja seejärel Puuduta valikut “Colour Start” mis on tähistatud number kuuega kõrval oleval ekraanitõmmisel.

Seejärel masin skaneerib esimese ID kaardi külje.

ID Card Copy On
Nüüd keera ID kaart ringi (aseta kaart tagumise küljega vastu klaasi. Täpselt samale kohale kus ta ennem oli). ID Card Back side
Puuduta valikut “Start Colour” mis on tähistatud number seitsmega kõrval oleval ekraanitõmmisel.

Seejärel skaneerib masin ID kaardi tagumise külje. Kui see on tehtud puuduta valikut “Read End” mis on tähistatud number kaheksaga.

Printer peaks nüüd välja printima ID kaardi koopia kus mõlemad kaardi küljed asetsevad paberi esimesel küljel.

ID Card Read End

Antud juhendis on kasutatud näitena Sharp MX seeria värvi laserprinterit;
https://rtt.ee/toode/koopiamasinad/varvi-koopiamasinad/sharp-mx-2651/

How to Print on Heawy paper With Sharp Printers

Printing on heawy paper and envelopes requires selecting the correct printing mode. It is very important to determine the type of paper to print on. If you not do so, it will causing the paper to get stuck in the machine and, in the worst case scenario, damage the printer’s fuser module, which can be very costly to repair or replace.
The following guide shows printing on heawy paper weighing between 221g and 256g, which corresponds to a type of paper called “Heavy Paper-3” in the printer’s specifications.
If you are using paper or other media of different weights (envelopes, stickers, etc. …), select the appropriate paper or media type instead of “Heavy Paper-3” in the following guide:

Thin Paper 55-59g
Heavy Paper-1 (thicker paper 106-176g)
Heavy Paper-2 (thicker paper 177-220g)
Heavy Paper-3 (thicker Paper 221-256g)
Heavy Paper-4 (257-300g thicker paper)
Recycled (recycled paper from waste paper)
Labels (stickers and envelopes)
Transparency (films)
Glossy Paper (Glossy and Photo Paper)
Embossed Paper (coated or embossed paper)

You can find the paper weight or media type on the packaging.

NB! If you do not know the weight of the paper and it is not detectable, always select the maximum paper weight that the printer can provide, perhaps Heavy Paper-4 (up to 300g) and double-sided printing, Heavy Paper-3 (up to 256g). Double-sided printing on paper thicker than 256g is not recommended and may cause a paper jam.
Never use thicker paper than is permitted in the printer’s technical specification. When printing, always use media (papers, stickers, transparencies,  etc …) designed for use in laser printers.

The guide “How to Print on Heawy paper With Sharp Printers” uses an example of printing a PDF from a Windows computer by opening the file with Adobe Acrobat Reader DC. When printing from other applications (word, powerpoint, etc …), options 1 to 3 may differ slightly from those shown here.

Open the document you want to print and select:

1) File

2) Print

Click file, print
From the following window, select:

3) Properties

Click Properties
From the following window, select:

4) Paper Source

5) Paper Type
(Heawy paper-3)

 

Print Properties
Once the previous selections are done and the print command is given, go to the printer and touch the following buttons on the printer touch screen:

6) OK

7) Tray Settings

Load paper
8)

Touch:

Bypass Tray

Select Paper Tray
9)

Touch:

Heavy Paper 3

Touch:

OK

to confirm selections

Select Paper Type
10)

Load the paper into the manual feed slot of the printer.

Feede

If the previous selections were correct, the printer should automatically print the desired job after loading the paper in the Bypass Tray.

If you want to set options 4 and 5 to the printing defaults, you can do it by following the instructions below:
How to set default printer preferences in windows.

This guide uses the Sharp MX series color laser printer as an example:
https://rtt.ee/toode/koopiamasinad/varvi-koopiamasinad/sharp-mx-2651/

%d bloggers like this: