IT tugi ja kaugabi ✶ IT support & remote assistance

Configure ZEBRA iMZ320 to work with Android

Open Zebra Setup Utilities

Select your printer (if not already selected) from the list of printers.

Click on the Configure Printer Connectivity button.

Select Bluetooth from the options and then select Next.

Change the Enable Reconnect setting from iOS Only to Off.

If you know your printers Bluetooth settings you can fill them in here and then press Finish and then your printer will update.

If you don’t know your printers Bluetooth settings then press Next and continue with the steps in this document. Highlight the line that says

!U1 setvar “bluetooth.enable_reconnect” “off”

and with that highlighted, right-click and select Copy.

Hit Cancel so you return to the Zebra Setup Utilities window and select Open Printer Tools.

Within the Tools window select the Action tab.

From the list of commands select Send Command and press Send.

Do not paste anything in the single line input field, once your press Send Command another window will open.

With the Printer Command window open, right-click and Paste the command from before and then press the Enter key one time so the cursor should be on a new line right below the command you have pasted.

Press the Send button to send the command to the printer.

Once you Close the Tools and Close the Zebra Setup Utilities you are now ready to begin using your printer with Android devices.

%d bloggers like this: